
ADOX NEUTOL Liquid WA - Warm Tone Paper Developer (1000ml)
Tax included. Shipping calculated at checkout
Estimated Shipping time to UK: about 7-10 days
Warm-black working paper developer.
It produces a beautiful, subtle warm tone without reducing the maximum black.
The image tone is highly dependent on the photographic paper used. The best results are achieved with warm-tone papers such as ILFORD FB Warmtone.
The developer is suitable for use in photographic trays and continuous processors.
Highly concentrated solution for dilutions between 1+7 and 1+15.
You achieve the best quality, durability, and yield with a dilution of 1+7.
Higher dilutions are particularly suitable for sporadic use when the number of sheets to be processed per working day is low and the interval between individual working days is long (discard the working solution in between).
Development time and capacity depend on the dilution.
Content: 1000ml
Application Recommendations
For dilution 1+7 (e.g., 125ml developer + 875ml water for 1L working solution):
- Development time for RC papers at 20 degrees C: 90 sec.
- Development time for fiber-based papers at 20 degrees C: 2.5 - 3 minutes
- Capacity: 120 sheets 18x24 cm per liter of working solution
For dilution 1+15:
- Development time for RC papers at 20 degrees C: 90 sec.
- Development time for fiber-based papers: Not recommended
- Capacity: 90 sheets 18x24 cm per liter of working solution
Note: Warm-tone developers, especially in conjunction with fiber-based papers, should always be combined with a stop bath to prevent staining. When using a pH-neutral fixer (Bergger Berfix N), we recommend extended intermediate washing or a weakly concentrated stop bath.
Information on the disposal of photo chemicals can be found in the safety data sheet (MSDS), which you can download or find on the respective manufacturer's websites.
Product Safety Information
Manufacturer:
ADOX Fotowerke GmbH
Pieskower Straße 30A
DE-15526 Bad Saarow
GPSR@adox.de
Further product safety information:


Danger
Contains: Tetrasodium ethylenediaminetetraacetate, Hydroquinone
Causes skin irritation. May cause an allergic skin reaction.
Causes serious eye damage.
Suspected of causing genetic defects.
May cause cancer.
Wash thoroughly after handling. Wear protective gloves/protective clothing/eye protection/face protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER/doctor. If skin irritation occurs: Get medical advice/attention. Dispose of contents/container in accordance with local regulations.
Downloads
Choose options

Tax included. Shipping calculated at checkout
Warm-black working paper developer.
It produces a beautiful, subtle warm tone without reducing the maximum black.
The image tone is highly dependent on the photographic paper used. The best results are achieved with warm-tone papers such as ILFORD FB Warmtone.
The developer is suitable for use in photographic trays and continuous processors.
Highly concentrated solution for dilutions between 1+7 and 1+15.
You achieve the best quality, durability, and yield with a dilution of 1+7.
Higher dilutions are particularly suitable for sporadic use when the number of sheets to be processed per working day is low and the interval between individual working days is long (discard the working solution in between).
Development time and capacity depend on the dilution.
Content: 1000ml
Application Recommendations
For dilution 1+7 (e.g., 125ml developer + 875ml water for 1L working solution):
- Development time for RC papers at 20 degrees C: 90 sec.
- Development time for fiber-based papers at 20 degrees C: 2.5 - 3 minutes
- Capacity: 120 sheets 18x24 cm per liter of working solution
For dilution 1+15:
- Development time for RC papers at 20 degrees C: 90 sec.
- Development time for fiber-based papers: Not recommended
- Capacity: 90 sheets 18x24 cm per liter of working solution
Note: Warm-tone developers, especially in conjunction with fiber-based papers, should always be combined with a stop bath to prevent staining. When using a pH-neutral fixer (Bergger Berfix N), we recommend extended intermediate washing or a weakly concentrated stop bath.
Information on the disposal of photo chemicals can be found in the safety data sheet (MSDS), which you can download or find on the respective manufacturer's websites.
Product Safety Information
Manufacturer:
ADOX Fotowerke GmbH
Pieskower Straße 30A
DE-15526 Bad Saarow
GPSR@adox.de
Further product safety information:


Danger
Contains: Tetrasodium ethylenediaminetetraacetate, Hydroquinone
Causes skin irritation. May cause an allergic skin reaction.
Causes serious eye damage.
Suspected of causing genetic defects.
May cause cancer.
Wash thoroughly after handling. Wear protective gloves/protective clothing/eye protection/face protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER/doctor. If skin irritation occurs: Get medical advice/attention. Dispose of contents/container in accordance with local regulations.
Downloads
If you have any questions or concerns, please do not hesitate to contact us.
Best shipping
We ship your goods as quickly and safely as possible.
We process your payment information and other data securely.